How to Make Pottery Glaze

The Egyptians added ashes to pottery to generate a glossy sheen. Make your own pottery glaze by using common household goods. Modern pottery makers may want to experiment with the variance in kilns and chemicals. Tweak recipes for ceramic glaze to express your creativity.

Instructions

Dry Glaze

1. Step 1
   Choose a container that is two times larger than the total amount of finished glaze. Select a 1- to 5-gallon container. If you're making 1/2 gallon of glaze, use a 1-gallon container. This allows enough room to coat the pottery.
   
2. Step 2
   Adhere masking tape 1/4 to 1/2 inches from the bottom of the pottery. Placing the tape around the base of the piece helps later on during the firing process.
   
3. Step 3
   Pay attention to the cone number. There are a variety of kilns for firing pottery. Each uses the cone number as an indicator for the kiln type. Unless experimenting, use the specific type recommended.
   
4. Step 4
   Create a caramel dry glaze (cone 10) by combining 50 grams of pumice stone and 50 grams of rottenstone. For a satin green dry glaze (cone 10) replace the rottenstone with 14 seltzer tablets and 10 grams of talcum powder to the 50 grams of ground pumice. Grind the solid materials into a powder form
   
5. Step 5
   Measure dry ingredients one at a time. Pour them into the mixing container. To produce the best results, weigh all chemicals accurately.
   
6. Step 6
   Secure the sealable lid on the bucket. Place the container on its side and gently roll it on the floor for 1 to 2 minutes. Allow the dust to settle for at least 1 minute. Remove the lid after the dust has settled.
   
7. Step 7
   Apply the glaze to the pottery by dipping the piece into the dry glaze.
   

Household Substitutes

8. Step 1
   Use cat litter for the clay component in pottery glaze. Purchase a bag of clumping litter for the best results.
   
9. Step 2
   Substitute the calcium carbonate with generic antacids. Name brand antacids contain additional chemicals such as magnesium carbonate. Visit the hardware store and purchase the powder used to make the white lines on a football field, also known as calcium carbonate.
   
10. Step 3
    Locate pumice or rottenstone that contains feldspar, another significant ingredient in pottery glaze. Find ground pumice stone or get an inexpensive stone for foot care and grind it yourself. You can buy rottenstone in paint and hardware stores.
    
11. Step 4
    Pour milk of magnesia into the glaze. It contains magnesium carbonate. Baby powder in talc form also offers this chemical.
    
12. Step 5
    Replace the required amount of silica with cleanser, toothpaste or gel packs from electronic merchandise.
    
13. Step 6
    Peruse the aisles of the local drug store for medicated powder or antiseptic ointment. The zinc oxide necessary to make glaze is found in these products. Find a sunscreen that contains titanium dioxide to use in making pottery glaze. This ingredient is also found in liquid paper.
    

Liquid Glaze

14. Step 1
    Measure out 3200 grams of feldspar, 2400 grams of whiting, 2400 grams of silica, 800 grams of zinc oxide, 1200 grams of kaolin, 400 grams of copper carbonate and 15 grams of white cement.
    
15. Step 2
    Pour the ingredients one at a time into the first 5-gallon bucket.
    
16. Step 3
    Add water into the second 5-gallon bucket until the container is 25 percent full. Agitate the water with the drill and paddle attachment. Slowly pour in the dry chemicals. Add water in increments of 10 percent to thin the glaze.
    
17. Step 4
    Mix all of the ingredients until the desired consistency is met. Apply the liquid glaze to the pottery with a brush, spray or by using the dip method.
    

Posted in:

If you are enjoying reading this blog,Share it on Facebook, Twitter, Buzz or Reddit.